int klcdr e, Alarmy, domofony, P.Poż, Satel
[ Pobierz całość w formacie PDF ]
®
KEYPADS
WITH PROXIMITY CARD READER
INT-KLCDR-GR
INT-KLCDR-BL
int-klcdr_e 03/06
The INT-KLCDR-GR and INT-KLCDR-BL keypads are designed for operating and
programming the INTEGRA series and CA-64 control panels (the card reader is not
supported by the CA-64 control panel). They can also be used for programming the
ACU-100 wireless system controller.
The keypads differ in the backlight color of their display and keys, which is green in
the INT-KLCDR-GR and blue in the INT-KLCDR-BL.
Each keypad has 17 keys which enable the operator to navigate through the menu,
enter data, and start selected functions. It is also provided with a buzzer to confirm
keypad operations and signal events occurring in the alarm system. In addition, each
keypad has a built-in proximity card reader.
Fig. 1. View of the keypad.
6 LED indicators show the current status of the system.
ALARM
(red color) - steady light of the LED indicates alarm. When the alarm
period expires, the alarm memory is signaled by the LED blinking. The LED
goes out after alarm reset.
2
SATEL
INT-KLCDR-GR / INT-KLCDR-BL
TROUBLE
(yellow color) – blinking LED indicates a failure in the alarm system.
The LED is temporarily extinguished when partitions controlled by the keypad
are armed.
ARMED
(green color) - the LED is blinking when some of the partitions are
armed, and emitting steady light when all partitions controlled by the keypad
are armed.
SERVICE
(green color) - the LED is blinking when the control panel is in the
service mode (the function is only available to the user to whom a service code
has been assigned).
GROUP
(two green color LEDs) - used in graphic mode functions to indicate
which data set is currently displayed. The LEDs can show the number of zones
or outputs, or indicate the appropriate expander bus.
For further information concerning the installation and operation of the keypad please
refer to the
I
NSTALLER MANUAL
and
U
SER MANUAL
of the INTEGRA or CA-64 alarm control
panel.
Technical data
Nominal supply voltage (±15%).......................................................................... 12V DC
Maximum current consumption ............................................................................160mA
Average current consumption.................................................................................60mA
Operating temperature range ................................................................... -10°C…+55°C
Housing dimensions (width x height x thickness).................................. 140x126x26mm
Device complies with the standard EN50131 Grade III.
The latest EC declaration of conformity and product approval certificates
are available for downloading on website
www.satel.pl
SATEL sp. z o.o.
ul. Schuberta 79
80-172 Gdańsk
POLAND
tel. + 48 58 320 94 00
info@satel.pl
www.satel.pl
[ Pobierz całość w formacie PDF ]