Instrukcja Kenwood KDW 4TTSL, Zmywarka Kenwood KDW 4TTSL
[ Pobierz całość w formacie PDF ]
4 Place Settings
DISHWASHER
OWNER’S MANUAL
MODEL: KDW4TTSL
Please read this manual carefully before
operating your dishwasher. Retain it for
future reference.
0
Table of Contents
Page
Unit Parts Identification------------------------------------------------------------------------------------------------1
Important Safety Instructions-----------------------------------------------------------------------------------------2
Installation + Water Pressure ----------------------------------------------------------------------------------------3
Control Panel + LCD Display-----------------------------------------------------------------------------------------4
Loading Your Dishwasher---------------------------------------------------------------------------------------------5
Salt + Rinse Aid ---------------------------------------------------------------------------------------------------------6
Operating Instructions--------------------------------------------------------------------------------------------------7
Program Summary -----------------------------------------------------------------------------------------------------8
Common Problems and Solutions-----------------------------------------------------------------------------------9
Unit Part Identification
3
FRONT VIEW
4
5
1
6
2
7
INSIDE VIEW
8
11
9
12
13
REAR VIEW
14
17
15
16
1. Window 10a. Cutlery Basket(not shown)
2. Front Panel 11. Filter
3. Door Release Button 12. Detergent location
4. LCD 13. Door Assembly
5. Pause/Start key 14. Door Latch Mechanism
6. Program key 15. Water inlet Connection
7. Power (ON/OFF) Button 16. Drain Hose Connection
8. Rinse agent dispenser 17. Power Cord
9. Spray Arm 18. Water softener (Not Shown)
10. Dish Rack (Not Shown)
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using your dishwasher, follow basic safety precautions, including the following:
-
Please read this manual carefully before using the dishwasher for the first time.
-
This manual contains very important notes regarding the installation, use and
maintenance of your dishwasher.
-
The manufacturer cannot be responsible for problems caused by ignoring these safety
and caution instructions.
-
This dishwasher is designed for normal household use.
-
Do not use the dishwasher for industrial and commercial use, or other purpose.
-
Electrical safety is only guaranteed when the earth system of your house is in
accordance with the related local regulations. (Do not use an extension cable or cord.)
-
Only suitable household utensils should be placed in the dishwasher. (Please avoid
utensils that are non-heat resistant, metal decorated, etc.)
-
Keep detergents away from children.
-
If the hot water exceeds 65°C, adjust the water heater setting. If the hot water
temperature can not be maintained below 65°C, the dishwasher must be connected to
cold water.
-
Do not use any kinds of solvent in your dishwasher. They may cause an explosion or fire.
-
Do not spray water on the appliance. It may cause the failure of electrical parts or electric
shock.
-
Do not allow children to operate the dishwasher.
-
Do not allow children to play around the dishwasher when opening and closing the door.
-
Do not push down or sit on the inner door when the door is opened. It may cause the
deformation or failure of your dishwasher.
-
Do not use the detergent for hand washing. The detergent for dishwasher should be used
for normal operation.
-
Do not open the door when the LCD display “High temperature”, the hot steam may
causes personal injury.
-
If power supply cord is damaged, it must been replaced by the manufacturer or service
agent or a similar qualified person in order to avoid a hazard.
-
This appliance is fitted with a safety function that automatically stops the operation of the
dishwasher when it is exposed to heavy disturbance on its mains supply.
-
This appliance must be positioned so that the plug is accessible.
-
The appliance is not intended for use by young children or infirm persons without
supervision.
-
Young children should be supervised to ensure that they do not play with the appliance.
-
Dishwasher detergents are strong alkaline. They can be extremely dangerous if
swallowed. Avoid contact with skin and eyes and keep children away from the
dishwasher when the door is open. Check that the detergent receptacle is empty after
completion of the wash cycle.
-
The appliance is to be connected to the water mains using new hose-sets supplied and
that old hose-sets should not be re-used.
2
SAVE THESE INSTRUCTIONS
WARNING
Instructions pertaining to a risk of fire, electric shock, or injury to persons.
Electrical Instructions
:
An electrical supply of 220-240 volts AC only, 50Hz is required. Make sure that a suitable
electrical supply socket is located close to where the dishwasher is to be placed.
For your
personal safety, the appliance must be earthed.
T
he appliance is equipped with a power
supply cord having a 3-pin plug. To minimize possible shock hazards it must be plugged into a
matching 3-pin type electrical outlet.
If the mains plug is unsuitable for the socket outlet in your home or is removed for any other
reason, then the cut off plug should be disposed of safety to prevent the hazard of electric shock.
Installation Instructions
1.
Remove all packing materials carefully
2.
Use the supplied hose. Do not reuse old hoses.
3.
The water inlet hose from the machine terminates in a ¾” female connector. The water
supply should therefore terminate in a similar male connector and should have a
stopcock close by in the pipe. It is recommended to connect the machine to hot water
supply. Connect the straight connector of the inlet hose to the water supply securely.
Connect the other end (bent connector) to the water inlet valve at the back of the
dishwasher cabinet. Do not over-tighten to avoid damage to threads.
4.
Prepare the drainage hose so that it has hooked end. Use the plastic U-bend fitting
provided for this purpose. The end of this should be dropped into a drainage standpipe,
the maximum height of which should be no more than 6” above the base of the
dishwasher. To allow for an air gap around the end of the drain hose, the diameter of the
standpipe should be at least 30 mm. Connect the other end of the drain hose (L shaped)
to the drain port connection at the back of the dishwasher cabinet. Tighten the drain hose
end on to the drain port using the metal clip included in the package.
5.
If you so wish, you may connect the water inlet hose on to the kitchen sink tap. You must
obtain correct fittings/adaptors to match the inlet hose connectors to ensure secure
connection. However, permanent plumbing is recommended.
6. If leaks are located, immediately shut the water supply and check the hose connections
fully. Tighten connections if necessary.
7. If for any reason you are unable to stop the leak yourself please seek advice from a
qualified plumber.
8. The minimum height clearance required to install your dishwasher on a countertop
surface with overhead cupboards is
19” (48cm).
9. Make sure there is an electrical power supply within easy reach of the machine. The
power cord is 210cm long.
10. The dishwasher must be installed on a ‘firm’ level surface.
11. To level the dishwasher, adjust the 4 level screws (feet) under the dishwasher.
Water Pressure
For best operating results, incoming water pressure should be between 0.03~1Mpa.
Incoming water supply for the dishwasher is controlled by a ‘low water switch’ application, so
if household water closedown, dishwasher will stop.
3
FOR BEST RESULTS:
Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure)
against the soiled surface of dishes. The water is pumped through a rotating spray arm, drained
through a filter removing food and soiled particles and pumped back through the spray arm.
Soiled water is pumped out and replaced with clean water at the end of each cycle (the number of
times depends on the cycle being used). For best cleaning results, the water temperature must
be at least 55
o
C. To prevent dishwasher damage, the temperature of the incoming water supply
should not exceed 70
o
C.
NOTE: Hard Water conditions will adversely affect wash ability performance of your dishwasher.
Hard Water conditions will also contribute to “Lime” (white film substance) deposits and/or
“Scaling” on the stainless steel surface of the dishwasher tub and “Heater Element” located in the
sump underneath the removable filter screen. To assist in minimizing these conditions, it is
recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of
white vinegar (at least once a week).
Disconnecting your Dishwasher
-
Close the water supply at the stopcock.
-
Disconnect the power supply cord.
-
Disconnect the inlet hose assembly from the water supply. When the dishwasher is not
in use, place/store the hose on the hanger hose bracket located on the rear wall of the
dishwasher cabinet.
-
Appliances that are to be discarded must be made unusable. Cut off the plug, remove
cable and make the door lock and latch unusable
! IMPORTANT !
Once you open the water supply line, (even if it is closed immediately thereafter) the water inlet
hose will be pressurized.
! CAUTION !
DO NOT LET CHILDREN DISCONNECT THE DISHWASHER. Close supervision of children is
always important around appliances.
Control panel and the LCD display
1.
The power indicator will light up when the power is turned
on.
2.
The salt indicator will light up when it needs to be re-filled.
3.
Program Key: you can select the program by pushing the program key.
4.
Pause/Start key: you can start or pause the program by pushing the Pause/Start key.
4
[ Pobierz całość w formacie PDF ]